Oberon 4 SC Insecticide-Miticide

Mix pesticides in areas not prone to runoff such as concrete mixing//loading pads, disked soil in flat terrain or graveled mix pads, or use a suitable method to contain spills and /or rinsate. Properly empty and triple-rinse pesticide containers at time of use as stated in the STORAGE AND DISPOSAL section.

Mixing and Loading Requirements:

To help prevent potential contamination of groundwater, use of a properly designed and maintained containment pad for mixing and loading of any pesticide into application equipment. If containment pad is not used, maintain a minimum distance of 25 feet between mixing and loading area and potential surface to groundwater conduits such as field sumps, uncased well heads, sink-holes, or field drains.

ORDER-OF-MIXING:

OBERON 4 SC INSECTICIDE/MITICIDE may be used with other recommended pesticides, fertilizers and micronutrients. The proper mixing procedure for OBERON 4 SC INSECTICIDE/MITICIDE alone or in tank mix combinations with other pesticides is:

1) Fill the spray tank 1/4 to 1/3 full with clean water;

2) While recirculating and with the agitator running, add any products in PVA bags (See Note). Allow time for thorough mixing;

3) Continue to fill spray tank with water until 1/2 full;

4) Add any other wettable powder (WP) or wettable granules (WG) products;

5) Add the required amount of OBERON 4 SC INSECTICIDE/MITICIDE, and any other "flowable" (FL or SC) type products;

6) Allow enough time for thorough mixing of each product added to tank;

7) If applicable, add any remaining tank mix components: emulsifiable concentrates (EC), fertilizers and micronutrients.

8) Fill spray tank to desired level and maintain constant agitation to ensure uniformity of spray mixture.

NOTE: Do not use PVA packets in a tank mix with products that contain boron or release free chlorine.

The resultant reaction of PVA and boron or free chlorine is a plastic that is not soluble in water or solvents.