VIOS FX HERBICIDE
CROP PROTECTION

VIOS FX HERBICIDE

Herbicide
Vios™ FX herbicide provides cross-spectrum weed control of your toughest weeds, including Group 1 resistant wild oats and kochia, by utilizing Group 2 and Group 4 active ingredients. As the first Group 2 graminicide with an emulsifiable concentrate (EC) formulation for wheat, Vios™ FX herbicide is also easy to handle, mix and provides customizable weed control through its tank mix flexibility.
Approved In
CO, ID, MN, MT, ND, SD, WY
    FormulaRegistration Number
    liquid0000264-01221-AA-0000000

    Active IngredientFormulation
    fluroxypyr 1-methylheptyl ester15.63 %
    Thiencarbazone-methyl0.46 %

Labels / MSDS

Use and Mixin

Use and Mixing

The instructions for use and mixing described below are from the Environmental Protection Agency approved Federal Label. Always read and follow label instructions. Not all products are registered for use in every state. Please check with Bayer or your local Lead State Agency for product registration status. If you wish to find out if a product is registered in your state or for additional product information, send us an email or call 1-866-99-BAYER.
      Reentry PPE
      PPE required for early entry to treated areas (that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water), is:\r\n- Coveralls\r\n- Chemical-resistant gloves made of barrier laminate, butyl rubber >= 14 mils, nitrile rubber >= 14 mils, or Viton >= 14 mils\r\n- Shoes and socks
      PPE
      PERSONAL PROTECTIVE EQUIPMENT (PPE) Applicators and other handlers must wear: - Long-sleeved shirt and long pants - Shoes plus socks - Chemical-resistant gloves made of barrier laminate, butyl rubber >= 14 mils, nitrile rubber >= 14 mils, or Viton >= 14 mils.
      Tankmix Compatibility
      COMPATIBILITY TESTING AND TANK MIX PARTNERS Compatibility If Vios FX Herbicide is to be tank mixed with liquid fertilizers or other pesticides, compatibility should be tested prior to mixing. To test for compatibility, use a small container and mix a small amount (0.5 to 1 qt) of spray, combining all ingredients in the same ratio as the anticipated use. If any indications of physical incompatibility develop, do not use this mixture for spraying. Indications of incompatibility usually will appear within 5-15 minutes after mixing. Read and follow all parts of the label of each tank-mix product. Tank Mix Instructions For control of weeds not listed on this label, Vios FX Herbicide may be mixed with other herbicides with the exception of dicamba containing products. It is the pesticide users responsibility to ensure that all products in the listed mixtures are registered for the intended use. Read and follow the most restrictive directions for use and precautionary statements of each product in the tank mixture. Broadleaf Herbicides 2,4 D(1),(3) Bronate(R) Herbicide (EPA Reg No. 264-438, bromoxynil, MCPA) (2),(3),(4) Buctril(R) Herbicide (EPA Reg No. 264-437, bromoxynil) (2),(3) Clopyralid(3) Fluroxypyr(5) Florasulam(3) Huskie(R) FX Herbicide (EPA Reg No. 264-1208, bromoxynil, fluroxypyr, pyrasulfotole)(3) HUSKIE(R) Herbicide (EPA Reg No. 264-1023, bromoxynil, pyrasulfotole)(3) MCPA Ester(3) Tribenuron-methyl Thifensulfuron (1) DO NOT apply more than 0.2495 lb/A of 2,4-D in tank mix. (2) Equivalent bromoxynil based products may be substituted in a tank mix for these products. (3) Applications of Vios FX Herbicide in winter wheat or spring wheat in combination with these EC tank mix partners or equivalents may cause crop response. (4) DO NOT apply more than 16 fl oz/A of Bronate(R) in tank mix. (5) Equivalent fluroxypyr product may be substituted. Grass Herbicides Osprey(R) Herbicide ( EPA Reg No. 264-802, mesosulfuron-methyl) Olympus(R) (EPA Reg No. 264-809, propoxycarbazone-sodium) Tank Mixtures for Disease Control Vios FX Herbicide may be applied in combination with Stratego(R)(EPA Reg No. 264-779, propiconazole & trifloxystrobin), pyraclostrobin, azoxystrobin, propiconazole* or thiophanate-methyl fungicides for weed and disease control. Do not apply Vios FX Herbicide in tank mixture with tebuconazole. Tank mix applications of herbicides with fungicides may cause temporary yellowing, leaf burn, and or height reduction of the crop. Refer to the specific fungicide label for use directions, application rates, restrictions and a list of diseases controlled. *Propiconazole products are limited to a maximum of 0.0513 lb ai/A Tank Mixtures for Insect Control Vios FX Herbicide may be applied with Baythroid(R) XL (EPA Reg No. 264-840, -cyfluthrin), zeta-cypermethrin or Lambda-cyhalothrin insecticides. Refer to the specific insecticide label for use directions, application rates, restrictions and a list of insects controlled. Order of Mixing Vios FX Herbicide must be applied with clean and properly calibrated equipment. Prior to adding Vios FX Herbicide to the spray tank, ensure that the spray tank, filters and nozzles have been thoroughly cleaned. In-line strainers and nozzle screens should be 50 mesh or coarser. 1. Fill the spray tank 1/4 to 1/2 full with clean water and begin agitation or bypass. 2. Add a listed tank mix partner, if desired. Please check Tank Mix section for optimum mixing suggestions 3. Add the specified rate of Vios FX Herbicide directly to the spray tank. Maintain sufficient agitation during both mixing and application. DO NOT pre-slurry by adding any quantity of Vios FX Herbicide to a small amount of water. 4. Fill the spray tank with balance of water needed. 5. Continue agitation during Vios FX Herbicide application to ensure uniform spray coverage. NOTE: Vios FX Herbicide may settle if left standing without agitation. If the spray solution is allowed to stand for one hour or more, re-agitate the spray solution for a minimum of 10 minutes before application.


Recommended Agronomy Resources