| Mesosulfuron-Methyl 4.5 % |
| 2 |
| 4.5 WDG |
| 0000264-00802-AA-0000000 |
Herbicide SensitivityA = Acceptable, C = Caution, W = Warning. Environmental conditions may cause herbicide interactions different than indicated for a particular growing season.Herbicide ToleranceRatings are based on observations and research using herbicides at labeled and above labeled rates to simulate extreme environmental conditions, misapplication and adverse soil pH or organic content.
- Blackgrass
- Bluegrass, Annual
- Bluegrass, Bulbous
- Bluegrass, Kentucky
- Bluegrass, Roughstalk
- Brome, Downy
- Brome, Japanese
- Brome, Ripgut
- Brome, Soft
- Canarygrass, Hood
- Canarygrass, Littleseed
- Canola, Volunteer
- Cheat
- Chess, Hairy
- Chickweed, Common
- Darnel, Persian
- Goatgrass, Jointed
- Henbit
- Mustard, Tumble
- Mustard, Wild
- Oat, Wild
- Pennycress, Field
- Pigweed, Redroot
- Quackgrass
- Radish, Wild
- Ryegrass, Annual
- Ryegrass, Italian
- Ventenata
- Windgrass
DisclaimerPerformance may vary based on weather, pest resistance, and application timing. Listed efficacy is not a guarantee of total control; follow Integrated Pest Management (IPM) practices for optimal results.
- Triticale, Fall-Seeded
- Wheat, Fall-Seeded
- Wheat, Winter
DisclaimerRegistrations are subject to state-specific regulations. Always verify that your crop and location are listed on the current product label before use.
DisclaimerAlways check labels and local guidelines and laws to ensure appropriate usage.
DisclaimerAlways check labels and local guidelines and laws to ensure appropriate usage.
OSPREY Herbicide must be applied with clean and properly calibrated equipment. Prior to adding OSPREY Herbicide to the spray tank, ensure that the spray tank, filters, and nozzles have been thoroughly cleaned.
Mixing Order
- Fill the tank 1/4 to 1/3 full of water.
- While agitating, add the required amount of OSPREY Herbicide.
- Continue agitation until the OSPREY Herbicide is fully dispersed, at least 5 minutes.
- Once OSPREY Herbicide is fully dispersed, maintain agitation and continue filling tank with water. OSPREY Herbicide should be fully mixed with water before adding any other material.
- As the tank is filling, add the required amount of spray adjuvant (methylated seed oil or basic blend or non-ionic surfactant) and ammonium nitrogen fertilizer. Add additional pesticide tank mix partner, if desired.
- Continue agitation during herbicide application to ensure uniform spray coverage. If the mixture is not continuously agitated, settling may occur. If settling occurs, thoroughly re-agitate spray solution for at least 10 minutes before application. Use spray solution within 24 hours after mixing.
DisclaimerThe instructions for use and mixing described below are from the Environmental Protection Agency approved Federal Label. Always read and follow label instructions. Not all products are registered for use in every state. Please check with Bayer or your local Lead State Agency for product registration status. If you wish to find out if a product is registered in your state or for additional product information, send us an email or call 1-866-99-BAYER.