Osprey Xtra Herbicide

Order of Mixing

OSPREY Xtra Herbicide may be used with other recommended pesticides, fertilizers, and micronutrients.

The proper mixing procedure for OSPREY Xtra Herbicide alone or in tank mix combinations with other pesticides is as follows:

1. Fill the tank 1/4 to 1/3 full of water.
2. While agitating, add the required amount of OSPREY Xtra Herbicide.
3. Continue agitation until the OSPREY Xtra Herbicide is fully dispersed, at least 5 minutes.
4. Once OSPREY Xtra Herbicide is fully dispersed, maintain agitation and continue filling tank with water.

OSPREY Xtra Herbicide should be fully mixed with water before adding any other material

1. As the tank is filling, add the required amount of spray adjuvant and ammonium nitrogen fertilizer. Add additional pesticide tank mix partners, if desired.
2. Continue agitation during herbicide application to ensure uniform spray coverage. If the mixture is not continuously agitated, settling may occur. If settling occurs, thoroughly re-agitate spray solution for at least 10 minutes before application. Use spray solution within 24 hours after mixing.

NOTE: Do not use PVA packets in a tank mix with products that contain boron or release free chlorine.

The resultant reaction of PVA and boron or free chlorine is a plastic that is not soluble in water or solvents.