Velum® Rise Fungicide
CROP PROTECTION

Velum® Rise Fungicide

Fungicide
Velum® Rise is a fungicide/nematicide that builds off the proven nematode protection of Velum® Prime. In addition, it provides season-long suppression of key diseases like Rhizoctonia while promoting root health. It's in-furrow application method allows for early protection that will last through the season to maximize your yield potential.
Approved In
AK, AL, AR, AZ, CO, CT, DC, DE, FL, GA, IA, ID, IL, IN, KS, KY, LA, MA, MD, ME, MI, MN, MO, MS, MT, NC, ND, NE, NH, NJ, NM, NV, NY, OH, OK, OR, PA, RI, SC, SD, TN, TX, UT, VA, VT, WA, WI, WV, WY
    Group NumberFormulaRegistration Number
    GROUP 7 FUNGICIDE liquid0000264-01222-AA-0000000
    Active IngredientFormulation
    Penflufen9.38 %
    Fluopyram22.12 %
Labels / Safety Data Sheets (MSDS)
Additional Downloads
Use and Mixing

Use and Mixing

The instructions for use and mixing described below are from the Environmental Protection Agency approved Federal Label. Always read and follow label instructions. Not all products are registered for use in every state. Please check with Bayer or your local Lead State Agency for product registration status. If you wish to find out if a product is registered in your state or for additional product information, send us an email or call 1-866-99-BAYER.
      Reentry PPE
      PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water is: coveralls over long-sleeved shirt and long pants, socks and shoes, and chemical-resistant gloves composed of barrier laminate, butyl rubber >=14 mils, nitrile rubber >=14 mils, neoprene rubber >=14 mils, polyvinyl chloride (PVC) >=14 mils, or viton >=14 mils.
      PPE
      Applicators and other handlers must wear long-sleeved shirt and long pants, shoes plus socks, and waterproof or chemical-resistant gloves composed of barrier laminate, butyl rubber >=14 mils, nitrile rubber >=14 mils, neoprene rubber >=14 mils, polyvinyl chloride (PVC) >=14 mils, or viton >=14 mils.
      Tankmix Compatibility
      SPRAY MIXING AND COMPATIBILITY Begin with clean spray equipment and add one-half of the required amount of water to the spray or mixing tank and start agitation. Add the required quantity of fungicide and the tank-mix partner if applicable to the water and complete filling with water to the required total volume. Follow the advice of your State Cooperative Extension Service for tank mixing with other products. In general, follow the order beginning first with water conditioners, water soluble packaging (wait for it to completely dissolve), wettable powders and water dispersible granular products, liquid flowables and suspension concentrates, emulsifiable concentrates, and adjuvants last. Maintain agitation throughout spraying. DO NOT allow spray mixture to remain in the tank overnight, or for long periods during the day without agitation. VELUM RISE is physically compatible with most commonly used fungicide, herbicide, insecticide, and foliar nutrient products. However, the compatibility of VELUM RISE with all potential tank-mix partners has not been fully investigated. Compatibility with other pesticides can be tested by conducting a jar test with the volumes and rates typically used in agricultural application. Using a small container of water, add the proportionate amounts of the products: wettable powders and water-dispersible granular products first, then liquid flowables, and emulsifiable concentrates last. After thoroughly mixing, let stand for at least 15 minutes. Look for signs of separation, globules, sludge, flakes, or other precipitates. Physical compatibility is indicated if the combination remains mixed or can be remixed readily. The crop safety of all potential tank-mixes with VELUM RISE has not been tested on all crops listed on the label. Before applying any tank-mixture not specified on this label, safety to the target crop must be confirmed on a small portion of the crop listed on the label to be treated to ensure an adverse response will not occur. It is the pesticide user's responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.

Recommended Agronomy Resources

ARTICLE

Velum® + Movento®

ARTICLE

A Force in Controlling Nematodes

ARTICLE

Proper Planning for Potato Planting

Disclaimer

Always read and follow pesticide label directions, insect resistance management requirements (where applicable), and grain marketing and all other stewardship practices.