Use & Mixing

The instructions for use and mixing described below are from the Environmental Protection Agency approved Federal Label. Please click on 'Labels / MSDS' in the left hand navigation for special or state label instructions. Always read and follow label instructions.

Stance Plant Regulator

Reentry PPE
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water, is:- Coveralls- Chemical-resistant gloves made of any waterproof material such as polyethylene or polyvinyl chloride.- Shoes plus socks
PERSONAL PROTECTIVE EQUIPMENTApplicators and other handlers must wear:- Long-sleeved shirt and long pants- Chemical-resistant gloves made of any waterproof material such as polyethylene or polyvinyl chloride.- Shoes plus socksFollow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables, use detergent and hot water. Keep and wash PPE separately from other laundry.
MIXING INSTRUCTIONSSTANCE Plant Regulator is a suspension concentrate (SC) formulation and must be applied with calibrated spray equipment. STANCE is formulated to mix readily in water. Prior to adding STANCE to the spray tank, ensure that the spray tank is thoroughly cleaned and free of other pesticides that may injure cotton. STANCE is compatible with most insecticides and miticides. STANCE can be tank mixed with foliar fertilizers if prior experience and/or test strips has proven to be compatible and non-injurious. Prior to preparing a tank mix always perform a compatibility test mix with all tank mix components. Mix the finished spray solution as follows:1. Fill the spray tank half-full with water.2. Start agitation.3. Add STANCE and continue agitation.4. If mixing with a dry flowable/wettable powder tank mix partner, prepare a slurry of the proper amount of the product in a small amount of water. Add the slurry of dry materials to the spray tank.5. If mixing with a liquid tank mix partner, add the liquid tank mix partner.6. Complete filling the spray tank with water.Ensure that all spray system lines including pipes, booms, and screens have the correct concentration of the spray solution by flushing out the system lines before starting the crop application. Maintain agitation until the contents of the tank is sprayed. If the spray mixture is allowed to settle, thorough agitation is required to re-suspend the mixture before spraying is resumed. Screen size in nozzles or line strainers must be 50 mesh or larger.

Always read and follow label instructions. Not all products are registered for use in every state. Please check with Bayer or your local Lead State Agency for product registration status. If you wish to find out if a product is registered in your state or for additional product information, send us an email or call 1-866-99-BAYER.
Learn more about our innovative cotton solutions from seed to harvest.// more
Copyright © Bayer CropScience