Use & Mixing
The instructions for use and mixing described below are from the Environmental Protection Agency approved Federal Label. Please click on 'Labels / MSDS' in the left hand navigation for special or state label instructions. Always read and follow label instructions.
Balance Flexx Herbicide
- Order of MixingBALANCE FLEXX Herbicide may be used with other recommended pesticides, fertilizers, and micronutrients.The proper mixing procedure for BALANCE FLEXX Herbicide, with water or liquid fertilizer as a carrier:1. Fill the spray tank 1/4 to 1/2 of the required volume of water or liquid fertilizerprior to the addition of BALANCE FLEXX Herbicide.2. Add the proper amount of BALANCE FLEXX Herbicide, then add the rest of the water or liquid fertilizer to the desired level.3. Maintain sufficient agitation to ensure a uniform spray mixture during application.4. If BALANCE FLEXX Herbicide is applied in a tank mixture with other pesticides,add BALANCE FLEXX Herbicide to the spray tank first and ensure it is thoroughly dispersed before adding other pesticides.5. Continue to fill the tank with carrier to the desired volume while agitating.Continue agitation during application to ensure a uniform spray mixture.
- Reentry PPE
- PPE required for early entry to treated areas (that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water), is:- Coveralls over long-sleeved shirt and long pants- Chemical-resistant gloves made of any waterproof material- Socks plus chemical resistant footwear- Protective eyewear
- PERSONAL PROTECTIVE EQUIPMENT (PPE)Some of the materials that are chemical-resistant to this product are listed below.Applicators and other handlers must wear:- Long-sleeved shirt and long pants- Chemical-resistant gloves made of any waterproof material such as polyethyleneor polyvinyl chloride- Shoes plus socks- Protective eye wearWhen mixing/loading or cleaning equipment, wear a chemical resistant apron in addition to the other required PPE. Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this product's concentrate. Do not reuse them.
- COMPATIBILITY TESTING AND TANK MIX PARTNERSCompatibilityIf BALANCE FLEXX Herbicide is to be tank mixed with liquid fertilizers or other pesticides, compatibility should be tested prior to mixing. To test for compatibility,use a small container and mix a small amount (0.5 to 1 qt) of spray, combining all ingredients in the same ratio as the anticipated use. If any indications of physical incompatibility develop, do not use this mixture for spraying. Indications of incompatibility usually will appear within 5-15 minutes after mixing. Read and followall parts of the label of each tank-mix product.
Always read and follow label instructions. Not all products are registered for use in every state. Please check with Bayer or your local Lead State Agency for product registration status. If you wish to find out if a product is registered in your state or for additional product information, send us an email
or call 1-866-99-BAYER.