Use & Mixing

The instructions for use and mixing described below are from the Environmental Protection Agency approved Federal Label. Please click on 'Labels / MSDS' in the left hand navigation for special or state label instructions. Always read and follow label instructions.

Ricestar Herbicide

Instructions
Fill the spray tank half full with water while the agitator is running. Add the recommended amount of Ricestar(R) Herbicide followed by the appropriate amount of the tank mix component (if used). Then add the remaining amount of water.
Reentry PPE
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water, is: coveralls; waterproof gloves; shoes plus socks.
PPE
Applicators and other handlers must wear: Long-sleeved shirt and long pants, protective eyewear, shoes and socks.
Tankmix
Tankmix Recommendation For broad spectrum weed control, Ricestar(R) Herbicide may be tankmixed with other herbicides. Refer to the tankmix partner list that identifies potential mixture partners. Apply tankmixes with Ricestar(R) Herbicide before the annual grasses have passed the 3 leaf stage of growth. Do not tankmix Ricestar(R) Herbicide with any other product when the grasses have exceeded the 3 leaf stage. When tankmixing, follow the directions for use on the label of the mixing partner. Tankmix Partners Product Aim(TM) Herbicide Basagran(R) Herbicide Bolero(R) 8EC Herbicide Command 3ME Herbicide Facet 75 DF Herbicide Londax(R) Herbicide Permit(R) Herbicide Prowl(R) 3.3 EC Herbicide Storm(R) Herbicide Whip(R) 360 Herbicide When tankmixing Ricestar(R)Herbicide and Whip(R) 360 Herbicide do not exceed a combined total of 17 fl. oz/A per application or a combined total of 30 fl. oz/A per crop year. Do not apply when the weed grasses are drought stressed as their control will be reduced. Increase pressure and volume of spray for thorough coverage when weed grasses are dense.

Ricestar HT Herbicide

Instructions
MIXING INSTRUCTIONSFill the spray tank half full with water while the agitator is running. Add the recommended amount of Ricestar(R) HT Herbicide followed by the appropriate amount of the tank mix component (if used). Then add the remaining amount of water.SEQUENTIAL APPLICATIONSIn preflood applications, a new flush of weeds may occur before the field receives the permanent flood; therefore, other herbicide applications may be required. DO NOT make a second application of Ricestar(R) HT Herbicide within 14 days of the first application.
Reentry PPE
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water, is: coveralls; waterproof gloves; shoes plus socks.
PPE
PERSONAL PROTECTIVE EQUIPMENT (PPE)Some materials that are chemical-resistant to this product are listed below. If you want more options, follow the instructions for category G on an EPA chemical resistance category selection chart.Applicators and other handlers must wear:Long-sleeved shirt and long pants, protective eyewear, shoes and socks.Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables, use detergent and hot water. Keep and wash PPE separately from other laundry.
Tankmix
Tankmix RecommendationFor broad spectrum weed control, Ricestar HT Herbicide may be tankmixed with other herbicides. Refer to the tankmix partner list that identifies potential mixture partners. Apply tankmixes with Ricestar HT Herbicide before the annual grasses have passed the 3 leaf stage of growth. Do not tankmix Ricestar HT Herbicide with any other product when the grasses have exceeded the 3 leaf stage. When tankmixing, follow the directions for use on the label of the mixing partner.Tankmix Partners:Product: Aim(TM) Herbicide, Basagran(R) Herbicide, Bolero(R) 8EC Herbicide, Command 3ME Herbicide, Facet(R) 75 DF Herbicide, Londax(R) Herbicide, Permit(R) Herbicide, Prowl(R) 3.3 EC Herbicide, Storm(R) Herbicide, Whip(R) 360 Herbicide.When tankmixing Ricestar HT Herbicide and Whip(R) 360 Herbicide do not exceed a combined total of 17 fl. oz/A per application or a combined total of 30 fl. oz/A per crop year. Do not apply when the weed grasses are drought stressed as their control will be reduced. Increase pressure and volume of spray for thorough coverage when weed grasses are dense.
Always read and follow label instructions. Not all products are registered for use in every state. Please check with Bayer or your local Lead State Agency for product registration status. If you wish to find out if a product is registered in your state or for additional product information, send us an email or call 1-866-99-BAYER.

View all labels / MSDS

Discover why Crop Science, a Division of Bayer, is a market leader in the field of crop science. » more
Protect your crop quality and yield potential for an optimal harvest. » more
Copyright © Bayer CropScience