Use & Mixing
The instructions for use and mixing described below are from the Environmental Protection Agency approved Federal Label. Please click on 'Labels / MSDS' in the left hand navigation for special or state label instructions. Always read and follow label instructions.
Raxil Pro MD
- Instructions
- In some instances, a chemical slurry dilution may enhance coverage. A 1 part Raxil PRO MD with 1 part water dilution may be used.
- PPE
- Workers involved with treating the seed (e.g. connecting and disconnecting hoses and transfer pumps, mixing, equipment calibration, etc.) and other exposed to the concentrate, and cleaners/repairers of seed treatment equipment must wear a long-sleeve shirt and long pants, shoes plus socks, protective eyewear (goggles, face shield, or safety glasses) and chemical resistant gloves such as barrier laminate, butyl rubber >=14 mils, nitrile rubber >=14 mills, polyvinyl chloride (PVC) >=14 mils, and viton >=14 mills.Baggers and bag sewers must wear a long-sleeve shirt and long pants, and shoes plus socks.
- Tankmix
- Use tank mixtures with fungicide from a different group that are equally effective on the target pest when such use is permitted. Use at least the minimum application rate as labeled by the manufacturer.
Raxil Pro MD (NY)
- Instructions
- In some instances, a chemical slurry dilution may enhance coverage. A 1 part RAXIL PRO MD with 1 part water dilution may be used.
- PPE
- Workers involved with treating the seed (e.g. connecting and disconnecting hoses and transfer pumps, mixing, equipment calibration, etc.) and other exposed to the concentrate, and cleaners/repairers of seed treatment equipment must wear a long-sleeve shirt and long pants, shoes plus socks, protective eyewear (goggles, face shield, or safety glasses) and chemical resistant gloves (such as natural rubber, follow the instructions for category A on an EPA chemical-resistance category selection chart).Baggers and bag sewers must wear a long-sleeve shirt and long pants, and shoes plus socks.
Raxil PRO Shield
- Reentry PPE
- PPE required for early entry to treated areas (that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water), is:- coveralls over long-sleeved shirt and long pants- Chemical resistant gloves made of: barrier laminate, butyl rubber >= 14 mils, nitrile rubber >= 14 mils, neoprene rubber >= 14 mils, pvc >= 14 mils, or viton >= 14 mils.- chemical-resistant footwear plus socks- protective eyewearNotify workers of the application by warning them orally.
- PPE
- PERSONAL PROTECTIVE EQUIPMENT (PPE)Workers, loaders, applicators and other handlers involved in on-farm treatment must wear:- Long pants- Long-sleeved shirt- Socks and shoes- Chemical resistant gloves made of: barrier laminate, butyl rubber >= 14 mils, nitrile rubber >= 14 mils, neoprene rubber >= 14 mils, pvc >= 14 mils, or viton >= 14 mils.- In addition to the above PPE for on farm treatment, workers involved in bagging, sewing, or stacking bags of treated seed or when transferring seed to a storage bin, must wear: a filtering face piece NIOSH approved respirator (TC-84A) with any N, R, or P filter.Workers, loaders, baggers, applicators and other handlers involved in commercial seed treatment facilities must wear:- Long pants- Long-sleeved shirt- Socks and shoes- Chemical resistant gloves made of: barrier laminate, butyl rubber >= 14 mils, nitrile rubber >= 14 mils, neoprene rubber >= 14 mils, pvc >= 14 mils, or viton >= 14 mils.- A minimum of a filtering face piece NIOSH approved respirator (TC-84A) with any N, R, or P filter.
- Tankmix
- COMPATIBILITYIt is essential that before using Raxil PRO Shield Insecticide and Fungicide in any tank mixture the compatibility of the mixture be established. Add Raxil PRO Shield Insecticide and Fungicide at the labeled rate to a clean quart jar containing approximately one-half the amount of water intended for a final slurry application rate. Next, follow with all other tank mix components that will be used in the total slurry application. Add last the remaining balance of water. The total amount of volume is determined by the seed size and how much is necessary to ensure complete and uniform coverage and distribution on the seed, as well as the type of commercial seed treating application equipment that will be used.DO NOT USE MIXTURES THAT CURDLE, PRECIPITATE, OR GEL. USE TANK MIXTURES IMMEDIATELY AFTER MIXING WITH ADEQUATE AGITATION.It is the pesticide user's responsibility to ensure that all products in the listed mixtures are registered for the intended use. Users must follow the most restrictive directions are precautionary language of the products of the mixture (for example, first aid from one product, ppe from another).
Always read and follow label instructions. Not all products are registered for use in every state. Please check with Bayer or your local Lead State Agency for product registration status. If you wish to find out if a product is registered in your state or for additional product information,
send us an email or call 1-866-99-BAYER.