The instructions for use and mixing described below are from the Environmental Protection Agency approved Federal Label. Please click on 'Labels / MSDS' in the left hand navigation for special or state label instructions. Always read and follow label instructions.
42-S Thiram Fungicide
- Reentry PPE
- PPE required for early reentry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, suchas plants, soil, or water, is: coveralls, shoes plus socks, chemical-resistant gloves made of any waterproof material, and protective eyewear.
- PPE
- PERSONAL PROTECTIVE EQUIPMENT (PPE)Some materials that are chemical-resistant to this product are made of any waterproof material. If you want more options, follow the instructions for category A on an EPA chemical resistance category selection chart.All mixers/loaders, applicators and other handlers must wear:- long-sleeved shirt and long pants,- shoes plus socks,- chemical resistant gloves,- chemical resistant apron when mixing, loading, participating in dip treatments, cleaning up spills, cleaning equipment, or otherwise exposed to the concentrate.NOTE: Persons involved in bagging treated seed, sewing or moving bags of treated seed, or cleaning up bagging areas or seed treatment equipment are pesticide handlers and must wear the PPE required on this label for pesticide handlers.
- Tankmix
- For Film-Coating Operations: 42-S Thiram has demonstrated good to excellent compatibility with most commercial film-coating products.Coating procedures identified by polymer/coating companies and film-coating equipment manufacturers should be followed when preparing coating preparations containing 42-S Thiram. If it is desirable to prepare slurries in large containers for addition to the slurry tank, entire contents should be thoroughly agitated before withdrawing any of the slurry.
Thiram 50 WP
- Instructions
- This product may be applied as a dry treatment or may be mixed into the required amount of water to form a slurry treatment.
(Rotary Drum or Small Container)-Fill unit not more than 1/2 full; add correct amount of Thiram; rotate slowly until product is evenly distributed on all seed.
(Planter or Drill Box)-Place 1/2 the total amount of seed and Thiram in box and mix with paddle or stick. Add remaining 1/2 of seed and Thiram and stir as specified above.
Treat peanuts promptly after shelling. Other seeds may be treated anytime after being well-cured.
For film-coating operations-Thiram 50WP has demonstrated good to excellent compatibility with most commercial film coating products. Coating procedures identified by the polymer/coating companies and fill-coating equipment manufacturers should be followed
when preparing coating preparations containing Thiram 50WP.
For the treatment of Ornamental Bulbs, Corms and Tubers-Treat after drying thoroughly coating with Thiram by shaking in a paper bag or similar device.
Bulbs, Corms and Tubers that are treated with this product must bear distinct labeling that instructs: CAUTION: Treated with thiram.
Wear rubber gloves and protective clothing when handling products treated with thiram. Direct exposure to skin may result in severe dermatitis.
- Reentry PPE
- PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water, is: coveralls, chemical-resistant gloves, shoes plus socks and protective eyewear.
- PPE
- Some materials that are chemical-resistant to this product are listed below. If you want more options, follow the instructions for category A on the EPA chemical resistance chart.
Applicators and other handlers (other than mixers and loaders) must wear: long-sleeved shirt and long pants, chemical-resistant gloves, shoes plus socks and protective eyewear.
Mixers and loaders must wear: long-sleeved shirt and long pants, waterproof gloves, shoes plus socks and protective eyewear.
Mixers and loaders must wear for exposures in enclosed areas, a NIOSH approved respirator with an organic vapor (OV) cartridge or canister with any N, R, P or HE prefilter. Mixers and loaders must wear, for exposures outdoors, a NIOSH approved respirator with any N, R, P or HE prefilter.
Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables, use detergent and hot water.
Keep and wash PPE separately from other laundry.
Thiram 50 WP Dyed
- Instructions
- This product may be applied as a dry treatment or may be mixed into the required amount of water to form a slurry treatment.
(Rotary Drum or Small Container)-Fill unit not more than 1/2 full; add correct amount of Thiram; rotate slowly until product is evenly distributed on all seed.
(Planter or Drill Box)-Place 1/2 the total amount of seed and Thiram in box and mix with paddle or stick. Add remaining 1/2 of seed and Thiram and stir as specified above.
- Reentry PPE
- PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water, is: coveralls, chemical-resistant gloves, shoes plus socks and protective eyewear.
- PPE
- Some materials that are chemical-resistant to this product are listed below. If you want more options, follow the instructions for category.
A on the EPA chemical resistance chart.
Applicators and other handlers (other than mixers and loaders) must wear: long-sleeved shirt and long pants, chemical-resistant gloves, shoes plus socks and protective eyewear.
Mixers and loaders must wear: long-sleeved shirt and long pants, waterproof gloves, shoes plus socks and protective eyewear.
Mixers and loaders must wear for exposures in enclosed areas, a NIOSH approved respirator with an organic vapor (OV) cartridge or canister with any N, R, P or HE prefilter. Mixers and loaders must wear, for exposures outdoors, a NIOSH approved respirator with any N, R, P or HE prefilter.
Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables, use detergent and hot water.
Keep and wash PPE separately from other laundry
Always read and follow label instructions. Not all products are registered for use in every state. Please check with Bayer or your local Lead State Agency for product registration status. If you wish to find out if a product is registered in your state or for additional product information,
send us an email or call 1-866-99-BAYER.