Huskie Herbicide
CROP PROTECTION

Huskie Herbicide

Herbicide
Powered by multiple sites of action (SOAs), Huskie® herbicide effectively controls a wide spectrum of broadleaf weeds, including resistant types.
Approved In
AK, AL, AR, CO, CT, DE, FL, GA, IA, ID, IL, IN, KS, KY, LA, MA, MD, ME, MI, MN, MO, MS, MT, NC, ND, NE, NH, NJ, NM, NV, OH, OK, OR, PA, RI, SC, SD, TN, TX, UT, VA, VT, WA, WI, WV, WY
    Group NumberFormulaRegistration Number
    GROUP BROMOXYNIL HERBICIDE liquid0000264-01023-AA-0000000

    Active IngredientFormulation
    Pyrasulfotole3.3 %
    Bromoxynil Octanoate13.4 %
    Bromoxynil Heptanoate12.9 %

Labels / MSDS
Additional Downloads

Use and Mixin

Use and Mixing

The instructions for use and mixing described below are from the Environmental Protection Agency approved Federal Label. Always read and follow label instructions. Not all products are registered for use in every state. Please check with Bayer or your local Lead State Agency for product registration status. If you wish to find out if a product is registered in your state or for additional product information, send us an email or call 1-866-99-BAYER.
      Reentry PPE
      PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated such as plants, soil or water, is coveralls over long-sleeved shirt and long pants, socks, shoes, chemical resistant gloves made of barrier laminate, butyl rubber >= 14 mils, nitrile rubber >= 14 mils, or neoprene rubber >= 14 mils, and protective eye wear.
      PPE
      PERSONAL PROTECTIVE EQUIPMENT (PPE) Applicators and other handlers must wear: Long-sleeved shirt and long pants, socks, shoes, chemical resistant gloves made of barrier laminate, butyl rubber >= 14 mils, nitrile rubber >= 14 mils, or neoprene rubber >= 14 mils, and protective eyewear (safety glasses). Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry. Discard clothing or other absorbent materials that have been drenched or heavily contaminated with this product's concentrate. Do not reuse them. To reduce exposure to residue, wash the spray rig, tractor, and all other equipment used to handle or apply this product with water daily or before using the equipment for any other uses.
      Tankmix Compatibility
      TANK MIX Compatibility Testing With Tank Mix Partners If Huskie Herbicide is to be tank mixed with other pesticides, compatibility should be tested prior to mixing. To test for compatibility, use a small container and mix a small amount (0.5 to 1 qt) of spray, combining all ingredients in the same ratio as the anticipated use. If any indications of physical incompatibility develop, do not use this mixture for spraying. Indications of incompatibility usually will appear within 5-15 minutes after mixing. Read and follow the label of each tank-mix product used for precautionary statements, directions for use, geographic and other restrictions. Tank mixtures For Insect Control Huskie Herbicide may be tank mixed with Baythroid(R) XL, Lorsban (R), Mustang Max (TM), Warrior(R) insecticides providing proper timing for insect and weed control are the same. Tank mixtures For Disease Control Fungicides such as Stratego(R), Tilt(R), Headline(R), mancozeb (Dithane F-45(R); Manzate(R) 75DF; Penncozeb(R) 75DF), Quadris(R), Quilt(TM), or Topsin(R) M can be tank mixed with Huskie Herbicide when timing for application of each tank mix partner is the same for the use site. Do not apply Huskie Herbicide in tank mixture with tebuconazole. Tank mix applications of herbicides with fungicides may cause temporary yellowing, leaf burn and or height reduction of the crop. Refer to the specific fungicide label for use directions, application rates, restrictions and a list of diseases controlled. Tank mixtures For Weed Control Huskie Herbicide is a very broad spectrum broadleaf herbicide. In certain weed control situations it may be advantageous to tank mix Huskie Herbicide with the herbicides listed below to provide expanded weed control. This product contains 0.08 pounds of mefenpyr-diethyl per gallon. Applying the maximum labeled single application rate of Huskie Herbicide delivers 0.01 lb of mefenpyr-diethyl per acre. When tank mixing, read and follow the precautionary statements, directions for use, weeds controlled, geographic, and other restrictions on the labeling of each tank mix partner used. Ensure tank mix product is registered for the desired crop, and use in accordance with the most restrictive label limitations and precautions. MIXING INSTRUCTIONS Huskie Herbicide must be applied with clean and properly calibrated equipment. Prior to adding Huskie Herbicide to the spray tank, ensure that the spray tank, filters and nozzles have been thoroughly cleaned. In-line strainers and nozzle screens should be 50 mesh or coarser. 1. Fill the spray tank 1/4 to 1/2 full with clean water then add AMS or UAN and begin agitation or bypass. 2. Add the appropriate rate of Huskie Herbicide directly to the spray tank. Maintain sufficient agitation during both mixing and application. 3. Add a recommended herbicide, if desired. 4. Add surfactant if desired. 5. Fill the spray tank with balance of water needed. 6. Continue agitation during Huskie Herbicide application to ensure uniform spray coverage.


Recommended Agronomy Resources