Use & Mixing
The instructions for use and mixing described below are from the Environmental Protection Agency approved Federal Label. Please click on 'Labels / MSDS' in the left hand navigation for special or state label instructions. Always read and follow label instructions.
Sivanto 200 SL
- Instructions
- Order of mixingSIVANTO 200 SL may be used with other recommended pesticides, fertilizers, and micronutrients.The proper mixing procedure for SIVANTO 200 SL alone or in tank mix combinations with otherpesticides is:1.fill the spray tank 1/4 to 1/3 full with clean water;2.while recirculating and with the agitator running, add any products in PVA bags (See Note).Allow time for thorough mixing;3.continue to fill spray tank with water until 1/2 full;4.add any wettable powder (WP), water dispersible granule (WG/WDG) products, or flowable(FL/SC) type products;5.allow enough time for thorough mixing of each product added to tank;6.add required amount of SIVANTO 200 SL, and;7.if applicable, add any remaining tank mix components: emulsifiable concentrates (EC),fertilizers and micronutrients;8.fill spray tank to desired level and maintain constant agitation to ensure uniformity of spray mixture.NOTE: Do not use PVA packets in a tank mix with products that contain boron or release free chlorine. The resultant reaction of PVA and boron or free chlorine is a plastic that is not soluble in water or solvents.
- Reentry PPE
- PPE required for early entry to treated areas (that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water), is:- Coveralls,- Chemical resistant gloves such as barrier laminate, butyl rubber, nitrile rubber, neoprene rubber, natural rubber, polyethylene, polyvinyl chloride (PVC) or viton,- Chemical resistant footwear plus socks.
- PPE
- PERSONAL PROTECTIVE EQUIPMENT (PPE)Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions -for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry.Discard clothing and other absorbent materials that have been drenched or heavily contaminated with this product's concentrate. Do not reuse them.Applicators and other handlers must wear:- Long sleeved shirt and long pants- Chemical resistant gloves made of any waterproof material such as barrier laminate, butyl rubber, nitrile rubber, neoprene rubber, natural rubber, polyethylene, polyvinyl chloride (PVC) or viton- Shoes and socks
- Tankmix
- COMPATIBILITY TESTING AND TANK MIX PARTNERS- If SIVANTO 200 SL is to be tank mixed with other pesticides, compatibility should be tested prior to mixing.- Observe the most restrictive of the labeling limitations and precautions of all products used in mixtures.CompatibilitySIVANTO 200 SL is physically and biologically compatible with many registered pesticides and fertilizers or micronutrients. However, it is known that many components, including crop protection products, fertilizers, micronutrients, and spray adjuvants, may be present in a tank mix combination.There is potential for adverse chemical reactions. It is impossible to determine physical, biological, and plant compatibility for all scenarios that may be encountered; therefore, it is recommended that users determine the chemical, physical, biological and plant compatibility of such mixes prior to making applications on a broad commercial scale.
Sivanto prime
- Reentry PPE
- PPE required for early entry to treated areas (that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water), is:- Coveralls- Chemical resistant gloves- Chemical resistant footwear plus socks
- PPE
- PERSONAL PROTECTIVE EQUIPMENT (PPE)Applicators and other handlers must wear:- Long sleeved shirt and long pants.- Chemical resistant gloves made out of: barrier laminate, butyl rubber => 14 mils, nitrile rubber => 14 mils, neoprene rubber => 14 mils, natural rubber => 14 mils, polyethylene, polyvinyl chloride => 14 mils, or viton => 14 mils.- Shoes and socks.
- Tankmix
- COMPATIBILITY TESTING AND TANK MIX PARTNERS- If SIVANTO prime is to be tank mixed with other pesticides, compatibility should be tested prior to mixing.- It is the pesticide user's responsibility to ensure that all products are registered for the intended use. Read and follow the applicable restrictions and limitations and directions for use on all product labels involved in tank mixing. Users must follow the most restrictive directions for use and precautionary statements of each product in the tank mixture.CompatibilitySIVANTO prime is physically and biologically compatible with many registered pesticidesand fertilizers or micronutrients. However, it is known that many components, including crop protection products, fertilizers, micronutrients, and spray adjuvants, may be present in a tank mix combination. There is potential for adverse chemical reactions. It is impossible to determine physical, biological, and plant compatibility for all scenarios that may be encountered; therefore, it is recommended that users determine the chemical, physical, biological and plant compatibility of such mixes prior to making applications on a broad commercial scale.Order of mixingSIVANTO prime may be used with other recommended pesticides, fertilizers, and micronutrients.The proper mixing procedure for SIVANTO prime alone or in tank mix combinations with otherpesticides is:1. Fill the spray tank 1/4 to 1/3 full with clean water;2. While recirculating and with the agitator running, add any products in PVA bags (See Note). Allow time for thorough mixing;3. Continue to fill spray tank with water until 1/2 full;4. Add any wettable powder (WP), water dispersible granule (WG/WDG) products, or flowable (FL/SC) type products;5. Allow enough time for thorough mixing of each product added to tank;6. Add required amount of SIVANTO prime, and;7. If applicable, add any remaining tank mix components: emulsifiable concentrates (EC), fertilizers and micronutrients;8. Fill spray tank to desired level and maintain constant agitation to ensure uniformity of spray mixture.NOTE: Do not use PVA packets in a tank mix with products that contain boron or release free chlorine. The resultant reaction of PVA and boron or free chlorine is a plastic that is not soluble in water or solvents.
Sivanto prime (CA)
- Reentry PPE
- PPE required for early entry to treated areas (that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water), is:- Coveralls- Chemical resistant gloves made of barrier laminate, butyl rubber, nitrile rubber, neoprene rubber, natural rubber, polyethylene, polyvinyl chloride (PVC) or Viton- Chemical resistant footwear plus socks
- PPE
- Applicators and other handlers must wear:- Long sleeved shirt and long pants- Chemical resistant gloves made of barrier laminate, butyl rubber, nitrile rubber, neoprene rubber, natural rubber, polyethylene, polyvinyl chloride (PVC) or viton- Shoes and socksUSER SAFETY REQUIREMENTSFollow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables exist, use detergent and hot water. Keep and wash PPE separately from other laundry.
- Tankmix
- COMPATIBILITY TESTING AND TANK MIX PARTNERS- If SIVANTO prime is to be tank mixed with other pesticides, compatibility should be tested prior to mixing.- Observe the most restrictive of the labeling limitations and precautions of all products used in mixtures.CompatibilitySIVANTO prime is physically and biologically compatible with many registered pesticidesand fertilizers or micronutrients. However, it is known that many components, including crop protection products, fertilizers, micronutrients, and spray adjuvants, may be present in a tank mix combination. There is potential for adverse chemical reactions. It is impossible to determine physical, biological, and plant compatibility for all scenarios that may be encountered; therefore, it is recommended that users determine the chemical, physical, biological and plant compatibility of such mixes prior to making applications on a broad commercial scale.Order of mixingSIVANTO prime may be used with other recommended pesticides, fertilizers, and micronutrients.The proper mixing procedure for SIVANTO prime alone or in tank mix combinations with otherpesticides is:1. Fill the spray tank 1/4 to 1/3 full with clean water;2. While recirculating and with the agitator running, add any products in PVA bags (See Note). Allow time for thorough mixing;3. Continue to fill spray tank with water until 1/2 full;4. Add any wettable powder (WP), water dispersible granule (WG/WDG) products, or flowable (FL/SC) type products;5. Allow enough time for thorough mixing of each product added to tank;6. Add required amount of SIVANTO prime, and;7. If applicable, add any remaining tank mix components: emulsifiable concentrates (EC), fertilizers and micronutrients;8. Fill spray tank to desired level and maintain constant agitation to ensure uniformity of spray mixture.NOTE: Do not use PVA packets in a tank mix with products that contain boron or release free chlorine. The resultant reaction of PVA and boron or free chlorine is a plastic that is not soluble in water or solvents.
Always read and follow label instructions. Not all products are registered for use in every state. Please check with Bayer or your local Lead State Agency for product registration status. If you wish to find out if a product is registered in your state or for additional product information,
send us an email or call 1-866-99-BAYER.