Use & Mixing
The instructions for use and mixing described below are from the Environmental Protection Agency approved Federal Label. Please click on 'Labels / MSDS' in the left hand navigation for special or state label instructions. Always read and follow label instructions.
- Begin with clean spray equipment and add one-half of the required amount of water tothe spray or mixing tank and start agitation. Add the required quantity of fungicide and the tank-mix partner if applicable to the water and complete filling with water to the required total volume.
- Reentry PPE
- PPE required for early entry to treated areas that is permitted under the WorkerProtection Standard and that involves contact with anything that has been treated, suchas plants, soil, or water is: coveralls over long-sleeved shirt and long pants, socks andshoes, and chemical-resistant gloves made of any waterproof material such asnatural rubber >= 14 mils.
- Personal Protective Equipment (PPE):Applicators and other handlers must wear long-sleeved shirt and long pants, shoes plussocks, and chemical-resistant (such as natural rubber) gloves.User Safety RequirementsFollow manufacturer's instructions for cleaning/maintaining PPE. If no such instructionsexist for washables, use detergent and hot water. Keep and wash PPE separately fromother laundry.
- Follow the recommendations of your State Cooperative Extension Service for tank mixing with other products. In general, follow the order beginning first with waterconditioners, water soluble packaging (wait for it to completely dissolve), wettable powders and water-dispersible granular products, liquid flowables and suspension concentrates, emusifiable concentrates, and adjuvants last. Maintain agitation throughout spraying. Do not allow spray mixture to remain in the tank overnight, or for long periods during the day without agitation. When tank mixing with other pesticides, observe the more restrictive label limitations and precautions.VELUM PRIME is physically compatible with most commonly used fungicide, herbicide,insecticide, and foliar nutrient products. However, the compatibility of VELUM PRIME with all potential tank-mix partners has not been fully investigated. If tank mixing with other pesticides is desirable, conduct a jar test with the volumes and rates typically used in agricultural application. Using a small container of water, add the proportionate amounts of the products: wettable powders and water-dispersible granular products first, then liquid flowables, and emusifiable concentrates last. After thoroughly mixing, let stand for at least 15 minutes. Look for signs of separation, globules, sludge, flakes, or other precipitates. Physical compatibility is indicated if the combination remains mixed or can be remixed readily.The crop safety of all potential tank-mixes with VELUM PRIME has not been tested onall crops. Before applying any tank-mixture not specified on this label, safety to the target crop should be confirmed on a small portion of the crop to be treated to ensure an adverse response will not occur.
Always read and follow label instructions. Not all products are registered for use in every state. Please check with Bayer or your local Lead State Agency for product registration status. If you wish to find out if a product is registered in your state or for additional product information, send us an email
or call 1-866-99-BAYER.