Use & Mixing

The instructions for use and mixing described below are from the Environmental Protection Agency approved Federal Label. Please click on 'Labels / MSDS' in the left hand navigation for special or state label instructions. Always read and follow label instructions.

Movento

Reentry PPE
PPE required for early entry to treated areas (that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water), is:- Coveralls- Chemical-resistant gloves- Shoes plus socks
PPE
PERSONAL PROTECTIVE EQUIPMENT (PPE)Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables, use detergent and hot water. Keep and wash PPE separately from other laundry.Applicators and other handlers must wear:- Long-sleeved shirt and long pants- Chemical-resistant gloves- Shoes plus socks
Tankmix
COMPATIBILITY TESTING AND TANK MIX PARTNERSObserve all cautions and limitations on labeling of all products used in mixtures.- When considering mixing MOVENTO with other pesticides, or other additives, first contact your supplier for advice.- For further information, contact your local Bayer representative.- If your supplier and Bayer representative have no experience with the combination you are considering, you should conduct a test to determine physical compatibility.- To determine physical compatibility, add the recommended proportions of each chemical with the same proportion of water, as will be present in the chemical supply tank, into a suitable container, mix thoroughly and allow to stand for five minutes. If the combination remains mixed, or can be readily re-mixed, the mixture is considered physically compatible.CompatibilityMOVENTO is physically and biologically compatible with many registered pesticides and fertilizers or micronutrients. However, it is known that many components, including crop protection products, fertilizers, micronutrients, and spray adjuvants, may be present in a tank mix combination. There is potential for adverse chemical reactions. It is impossible to determine physical, biological, and plant compatibility for all scenarios that may be encountered; therefore, it is recommended that users determine the chemical, physical, biological and plant compatibility of such mixes prior to making applications on a broad commercial scale. Observe the most restrictive of the labeling instructions and precautions of all products used in mixtures.Order of MixingThe proper mixing procedure for MOVENTO alone or in tank mix combinations with other pesticides is:1. Fill the spray tank 1/4 to 1/3 full with clean water;2. While recirculating and with the agitator running, add any products in Polyvinyl acetate (PVA) bags (See Note).Allow time for thorough mixing;3. Continue to fill spray tank with water until 1/2 full;4. Add any other wettable powder (WP) or wettable granules (WG) products;5. Add the required amount of MOVENTO, and any other "flowable" (FL or SC) type products; add required amount of MOVENTO, and;6. Allow enough time for thorough mixing of each product added to tank;7. If applicable, add any remaining tank mix components: emulsifiable concentrates (EC), fertilizers and micronutrients;8. Fill spray tank to desired level and maintain constant agitation to ensure uniformity of spray mixture.NOTE: Do not use PVA packets in a tank mix with products that contain boron or release free chlorine. The resultant reaction of PVA and boron or free chlorine is a plastic that is not soluble in water or solvents.

Movento (CA)

Reentry PPE
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and thatinvolves contact with anything that has been treated, such as plants, soil, or water, is:- Long-sleeved shirt and long pants- Protective eyewear- Chemical-resistant gloves- Shoes plus socks
PPE
PERSONAL PROTECTIVE EQUIPMENT (PPE)Applicators and other handlers must wear:- Protective eyewear- Long-sleeved shirt and long pants- Chemical-resistant gloves- Shoes plus socksFollow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables, use detergent and hot water. Keep and wash PPE separately from other laundry.
Tankmix
MIXING INSTRUCTIONSCOMPATIBILITY / MIXING / ORDER-OF-MIXINGObserve all cautions and limitations on labeling of all products used in mixtures.MOVENTO is physically and biologically compatible with many registered pesticides and fertilizers or micronutrients. However, it is known that many components, including crop protection products, fertilizers, micronutrients, and spray adjuvants, may be present in a tankmix combination that creates very unique and adverse chemical reactions, resulting in high risk circumstances. It is impossible to determine physical, biological, and plant compatibility for all scenarios that may be encountered and because of this reason, it is recommended that potential users determine the chemical, physical, biological and plant compatibility of such mixes prior to applications on a broad commercial scale.When considering mixing MOVENTO with other pesticides, or other additives, first contact your supplier for advice. For further information, contact your local Bayer representative. If your supplier and Bayer representative have no experience with the combination you are considering, you should conduct a test to determine physicalcompatibility. To determine physical compatibility, add the recommended proportions of each chemical with the same proportion of water, as will be present in the chemical supply tank, into a suitable container, mix thoroughly and allow to stand for five minutes. If the combination remains mixed, or can be readily re-mixed, the mixture isconsidered physically compatible.The proper mixing procedure for MOVENTO alone or in tank mix combinations with other pesticides is:1) Fill the spray tank 1/4 to 1/3 full with clean water;2) While recirculating and with the agitator running, add any products in Polyvinyl acetate (PVA) bags (See Note).Allow time for thorough mixing;3) Continue to fill spray tank with water until 1/2 full;4) Add any other wettable powder (WP) or wettable granules (WG) products;5) Add the required amount of MOVENTO, and any other flowable (FL or SC) type products;6) Allow enough time for thorough mixing of each product added to tank;7) If applicable, add any remaining tank mix components: emulsifiable concentrates (EC), fertilizers, micronutrients, spray adjuvants.8) Fill spray tank to desired level and maintain constant agitation to ensure uniformity of spray mixture.NOTE: Do not use PVA packets in a tank mix with products that contain boron or release free chlorine. The resultant reaction of PVA and boron or free chlorine is a plastic that is not soluble in water or solvents.

Movento (CA & NY)

Reentry PPE
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and thatinvolves contact with anything that has been treated, such as plants, soil, or water, is:- Long-sleeved shirt and long pants- Protective eyewear- Chemical-resistant gloves- Shoes plus socks
PPE
PERSONAL PROTECTIVE EQUIPMENT (PPE)Applicators and other handlers must wear:- Protective eyewear- Long-sleeved shirt and long pants- Chemical-resistant gloves- Shoes plus socksFollow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables, use detergent and hot water. Keep and wash PPE separately from other laundry.
Tankmix
MIXING INSTRUCTIONSCOMPATIBILITY / MIXING / ORDER-OF-MIXINGObserve all cautions and limitations on labeling of all products used in mixtures.MOVENTO is physically and biologically compatible with many registered pesticides and fertilizers or micronutrients. However, it is known that many components, including crop protection products, fertilizers, micronutrients, and spray adjuvants, may be present in a tankmix combination that creates very unique and adverse chemical reactions, resulting in high risk circumstances. It is impossible to determine physical, biological, and plant compatibility for all scenarios that may be encountered and because of this reason, it is recommended that potential users determine the chemical, physical, biological and plant compatibility of such mixes prior to applications on a broad commercial scale.When considering mixing MOVENTO with other pesticides, or other additives, first contact your supplier for advice. For further information, contact your local Bayer representative. If your supplier and Bayer representative have no experience with the combination you are considering, you should conduct a test to determine physicalcompatibility. To determine physical compatibility, add the recommended proportions of each chemical with the same proportion of water, as will be present in the chemical supply tank, into a suitable container, mix thoroughly and allow to stand for five minutes. If the combination remains mixed, or can be readily re-mixed, the mixture isconsidered physically compatible.The proper mixing procedure for MOVENTO alone or in tank mix combinations with other pesticides is:1) Fill the spray tank 1/4 to 1/3 full with clean water;2) While recirculating and with the agitator running, add any products in Polyvinyl acetate (PVA) bags (See Note).Allow time for thorough mixing;3) Continue to fill spray tank with water until 1/2 full;4) Add any other wettable powder (WP) or wettable granules (WG) products;5) Add the required amount of MOVENTO, and any other flowable (FL or SC) type products;6) Allow enough time for thorough mixing of each product added to tank;7) If applicable, add any remaining tank mix components: emulsifiable concentrates (EC), fertilizers, micronutrients, spray adjuvants.8) Fill spray tank to desired level and maintain constant agitation to ensure uniformity of spray mixture.NOTE: Do not use PVA packets in a tank mix with products that contain boron or release free chlorine. The resultant reaction of PVA and boron or free chlorine is a plastic that is not soluble in water or solvents.

Movento (NY)

Reentry PPE
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water, is:- Long-sleeved shirt and long pants- Protective eyewear- Chemical-resistant gloves- Shoes plus socks
PPE
Applicators and other handlers must wear:- Protective eyewear- Long-sleeved shirt and long pants- Chemical-resistant gloves- Shoes plus socksFollow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables, use detergent and hot water. Keep and wash PPE separately from other laundry.
Tankmix
MIXING INSTRUCTIONSCOMPATIBILITY / MIXING / ORDER-OF-MIXINGObserve all cautions and limitations on labeling of all products used in mixtures.MOVENTO is physically and biologically compatible with many registered pesticides and fertilizers or micronutrients. However, it is known that many components, including crop protection products, fertilizers, micronutrients, and spray adjuvants, may be present in a tankmix combination that creates very unique and adverse chemical reactions, resulting in high risk circumstances. It is impossible to determine physical, biological, and plant compatibility for all scenarios that may be encountered and because of this reason, it is recommended that potential users determine the chemical, physical, biological and plant compatibility of such mixes prior to applications on a broad commercial scale.When considering mixing MOVENTO with other pesticides, or other additives, first contact your supplier for advice. For further information, contact your local Bayer representative. If your supplier and Bayer representative have no experience with the combination you are considering, you should conduct a test to determine physical compatibility. To determine physical compatibility, add the recommended proportions of each chemical with the same proportion of water, as will be present in the chemical supplytank, into a suitable container, mix thoroughly and allow to stand for five minutes. If the combination remains mixed, or can be readily re-mixed, the mixture is considered physically compatible.The proper mixing procedure for MOVENTO alone or in tank mix combinations with other pesticides is:1) Fill the spray tank 1/4 to 1/3 full with clean water;2) While recirculating and with the agitator running, add any products in Polyvinyl acetate (PVA) bags (See Note). Allow time for thorough mixing;3) Continue to fill spray tank with water until 1/2 full;4) Add any other wettable powder (WP) or wettable granules (WG) products;5) Add the required amount of MOVENTO, and any other "flowable" (FL or SC) type products;6) Allow enough time for thorough mixing of each product added to tank;7) If applicable, add any remaining tank mix components: emulsifiable concentrates (EC),fertilizers, micronutrients, spray adjuvants.8) Fill spray tank to desired level and maintain constant agitation to ensure uniformity of spray mixture.NOTE: Do not use PVA packets in a tank mix with products that contain boron or release free chlorine. The resultant reaction of PVA and boron or free chlorine is a plastic that is not soluble in water or solvents.

Movento MPC

Instructions
Order of MixingThe proper mixing procedure for MOVENTO MPC alone or in tank mix combinations with other pesticides is:1. Fill the spray tank 1/4 to 1/3 full with clean water;2. While recirculating and with the agitator running, add any products in Polyvinyl acetate ( PVA) bags (See Note). Allow time for thorough mixing;3. Continue to fill spray tank with water until 1/2 full;4. Add any other wettable powder (WP) or wettable granules (WG) products;5. Add the required amount of MOVENTO MPC, and any other flowable (FL or SC) type products;6. Allow enough time for thorough mixing of each product added to tank;7. If applicable, add any remaining tank mix components: emulsifiable concentrates (EC), fertilizers, micronutrients, spray adjuvants.8. Fill spray tank to desired level and maintain constant agitation to ensure uniformity of spray mixture.NOTE: Do not use PVA packets in a tank mix with products that contain boron or release free chlorine. The resultant reaction of PVA and boron or free chlorine is a plastic that is not soluble in water or solvents.
Reentry PPE
PPE required for early entry to treated areas (that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated, such as plants, soil, or water), is:- Coveralls- Chemical-resistant gloves (e.g., neoprene)- Shoes plus socks
PPE
PERSONAL PROTECTIVE EQUIPMENT (PPE)Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables, use detergent and hot water. Keep and wash PPE separately from other laundry.Applicators and other handlers must wear:- Long-sleeved shirt and long pants- Chemical-resistant gloves (e.g., neoprene)- Shoes plus socks
Tankmix
COMPATIBILITY TESTING AND TANK MIX PARTNERSObserve all cautions and limitations on labeling of all products used in mixtures.- When considering mixing MOVENTO MPC with other pesticides, or other additives, first contact your supplier for advice.- For further information, contact your local Bayer representative. If your supplier and Bayer representative have no experience with the combination you are considering, you should conduct a test to determine physical compatibility.- To determine physical compatibility, add the recommended proportions of each chemical with the same proportion of water, as will be present in the chemical supply tank, into a suitable container, mix thoroughly and allow to stand for five minutes. If the combination remains mixed, or can be readily re-mixed, the mixture is considered physically compatible.CompatibilityMOVENTO MPC is physically and biologically compatible with many registered pesticides and fertilizers or micronutrients. However, it is known that many components, including crop protection products, fertilizers, micronutrients, and spray adjuvants, may be present in a tank mix combination. There is potential for adverse chemical reactions. It is impossible to determine physical, biological, and plant compatibility for all scenarios that may be encountered; therefore, it is recommended that users determine the chemical, physical, biological and plant compatibility of such mixes prior to making applications on a broad commercial scale.
Always read and follow label instructions. Not all products are registered for use in every state. Please check with Bayer or your local Lead State Agency for product registration status. If you wish to find out if a product is registered in your state or for additional product information, send us an email or call 1-866-99-BAYER.

View all labels / MSDS

Discover the latest options in long-lasting insect control for grapes.  » more
Copyright © Bayer CropScience